I upgraded today to pro hoping I can see the boost value of my turbo. I can't seem to find any info on how to do this. Help? I can see the boost on other free apps.
Turbo Boost Value
- 2,5K Перегляди
- Остання публікація 25 квітня 2019
inCarDoc
опубліковано це
03 травня 2018
Turbo boost not an OBD-II parameter, that is rater "artificial" calculated parameter Boost = MAP - 1atm
Where MAP is Manifold Absolute Pressure
You could consider using MAP instead of Boost
Thanks!
Christian GABRIEL
опубліковано це
07 січня 2019
Hello. I own a Volvo V60 D5 with two turbos. There are two pressure sensors. There is a low pressure turbo and a high pressure turbo. What is the value read by software? That of the low pressure turbo or that of the high pressure turbo? I ask myself the question because the value peaks at 1.5bar whereas it should vary around 1. 8bar. The most surprising thing is that there is no variation once the 1.5 bar reaches.
Christian GABRIEL
опубліковано це
07 січня 2019
I think the maximum value of MAP pressure in your APP is 255. Can you change this value and set it to 300?
So I could measure the 1.8 bar.
Christian GABRIEL
опубліковано це
07 січня 2019
I think the maximum value of MAP pressure in your APP is 255. Can you change this value and set it to 300?
So I could measure the 1.8 bar.
inCarDoc
опубліковано це
08 січня 2019
Unfortunately the limitation comes from OBD-II standard, that is the maximum reported valule is 255 kPa.
PID 0B, Intake manifold absolute pressure : OBD-II PIDs
Thanks!
vwditzel
опубліковано це
24 квітня 2019
- Остання редакція 24 квітня 2019
I hope too for turbo boost feature
my VW Polo Gti have a Charge air pressure sender G31 with intake air temperatur sender 2 G299 to controll the turbo boost.
Pics no avariable here?
best regards
vwditzel
опубліковано це
25 квітня 2019
app "Torque Pro" can it for VW....
