Is there a way to zoom in to the graph data in a record?? I have a record with 4 different parameters over about 15 mins of driving. It's useless however unless I can zoom in to compare values at different points.
Поиск: ዘላለም ተፈራ የስነምህዳር ተመራማሪ፣ መምህር - 2656 Результатов найдено
Bluetooth / WiFi OBD-II adapters Attention! "Bad" Bluetooth & WiFi adapters with low quality clones of ELM327.
inCarDoc
разместил это
18 августа 2016
Hello!Any one know is this one is a good one? The last elm327 that i bought from aliexpress died after 2 weeks~~, I drive a mitsubishi ASX 1.6 2015 and the car is ok.
Vgate one one of the reliable solutions from lower-price segment.
Bluetooth / WiFi OBD-II adapters Attention! "Bad" Bluetooth & WiFi adapters with low quality clones of ELM327.
Kalderos
разместил это
18 августа 2016
Hello!
Any one know is this one is a good one? The last elm327 that i bought from aliexpress died after 2 weeks~~, I drive a mitsubishi ASX 1.6 2015 and the car is ok.
OBD Car Doctor iOS functionality Can't Save Command combinations
inCarDoc
разместил это
10 августа 2016
Thank you for the info! We will try to reproduce and fix the issue. It would be helpful to get the log file with raw data: please reproduce the issue, then create mail with log (Settings - Send log) describe your steps and issue details in letter and send to us.
OBD Car Doctor iOS functionality Can't Save Command combinations
joelontheroad
разместил это
08 августа 2016
- Последний раз отредактировано 08 августа 2016
I'm unable to create and save new command combinations. For example, I want a screen that displays:
Short Term Fuel Trim
Long Term Fuel Trim
RPM
O2 sensor
When I create the new command combination, name it and save it, the program hangs. The only way to out is to kill the program. When I return, the command combination I created wasn't saved.
What do you suggest I do?
The program works fine for individual parameters.
iPhone 5s
ios 9.3.2 (13F69)
Thank you.
User feedback Пожелания
inCarDoc
разместил это
03 августа 2016
Сбросьте пожалуйста нам на почту записи с которыми наблюдаются проблемы, а также желательно описание проблемы и скриншоты на которых видно, что отображается каждый раз, посмотрим в чем может быть проблема. Спасибо
User feedback Пожелания
MasterVan
разместил это
03 августа 2016
Ребята! Наткнулся на весьма печальную стену. У меня самсунг галакси с3 и при просмотре записей обнаружилось такое: гашу экран свои дела и тд. включаю и бац другие графики но время тоже. И каждое последующее гашение включение экрана сотки покажет разную белиберду
Functionality Oxygen Sensor Dynamic Command Codes
ChrisQuimby
разместил это
01 августа 2016
https://en.wikipedia.org/wiki/OBD-IIPIDs#Mode05 has some useful information, but I'd rather not reverse-engineer the software or have to manually enter codes if I could figure out what the softwares' nomenclature stands for if the commands are ready made I'd rather just use them.
Functionality Oxygen Sensor Dynamic Command Codes
ChrisQuimby
разместил это
01 августа 2016
- Последний раз отредактировано 01 августа 2016
Hello,
Overall I am pleased with the software.
However I am having difficulty finding information regarding the parameter codes in the software for the Oxygen Sensors.
I have a 1997 Nissan Pathfinder with a VG33E V6 engine and manual transmission. This car does have two banks, and I understand that Bank 1 is the side of the engine that contains cylinder #1, and Bank two is the opposite side with cylinder #2.
In the OBD Car Doctor software (IOS, iPhone 5S) for Oxygen sensors it lists the following:
O211 (Bank 1)
O211 (Bank 2)
O212 (Bank 1)
O212 (Bank 2)
O221 (Bank 1)
O221 (Bank 2)
O222 (Bank 1)
O222 (Bank 2)
I am guessing this first character is O for Oxygen and the Letter O with the first number "2" is for the diatomic oxygen molecule "O2".
What I am trying to decipher is the meaning of the third and fourth character (the 2nd and 3rd numbers).
The bank location is indicated by the parenthetical note following the code, and it does not match any of the digit locations (i.e. there is an identical code of O211 for both Banks 1 & 2.
I am guessing that O211 is the code for the raw voltage output for the first oxygen sensor (for OBD-II vehicles with both a pre- and post-catalytic converter this would be the upstream, or oxygen sensor before the catalytic converter) in that bank.
I guess there are some vehicles that have two catalytic converters for each bank so that might be where some of the confusion comes in.
What I don't know is which code pertains to the raw data output for the 2nd Oxygen sensor (the one downstream-after the catalytic converter in the exhaust flow) in each bank. Is it the O212, O221, or the O222?
I checked the manual on the website and could not find this information.
I also tried searching standard OBD-II abbreviations and codes and also had no luck.
It looks like one of the parameters is the ratio between the pre and post catalytic converters expressed in a percentage, but it seems like sometimes that works, and sometimes it crashes the app.
Some of that may be due to sensor feedback delays.
If I knew for sure what the codes meant, instead of trying to figure out which one means what, it would make using the software much more beneficial.
Your assistance is appreciated. Thank you.
- Понравилось
-
Bluetooth / WiFi OBD-II adapters Attention! "Bad" Bluetooth & WiFi adapters with low quality clones of ELM327.
inCarDoc
разместил это
01 августа 2016
Unfortunately it does not possible to say smth, w/o through tests. The most problems observed with "no-name" adapters where you have no info about the manufacturer. If you have exact information and contacts of manufacturer, just try contact them and ask your questions. Thanks!
